High-sensitivity laboratory turbidity meter 2100N rental
High sensitivity and high precision laboratory turbidity meter
In digital display, there are 4 measurement ranges, and the minimum reading is 0.001 NTU.
- Company:レックス
- Price:Other
1~9 item / All 9 items
High sensitivity and high precision laboratory turbidity meter
In digital display, there are 4 measurement ranges, and the minimum reading is 0.001 NTU.
A chlorophyll turbidity meter equipped with a wiper for cleaning dirt on the optical sensor surface, designed for long-term continuous observation.
The light source for the chlorophyll and turbidity sensors uses highly stable light-emitting diodes, resulting in very little change over time! In particular, the turbidity sensor has good stability in low concentration ranges and a high correlation with suspended solids (SS) even in high concentration ranges, making it suitable not only for marine areas but also for surveys in dams and rivers.
Memory-type turbidity meter equipped with two turbidity sensors for medium and high concentration measurements.
This is a memory-type turbidity meter equipped with two turbidity sensors for medium and high concentration measurements, allowing for accurate measurements across a wide range from normal to high concentration. It also comes standard with water temperature and depth sensors, enabling it to meet various measurement needs. Additionally, the optical sensor section is equipped with a wiper to remove dirt, allowing for long-term continuous observation. As part of comprehensive sediment management, it is possible to conduct sediment dynamics monitoring using the turbidity meter.
By simply immersing the sensor in water, you can easily measure the turbidity of rivers, lakes, dams, agricultural water, industrial water, and drainage!
The measurement results can be displayed in either NTU or mg/L units, and it can store up to 100 data points!
Directly immerse it on-site to measure turbidity in real time!
The measurement range is 0 to 500 mg/l, and there are types with cable lengths of 10m and 30m. There is also a high concentration type with a measurement range of 200 to 2,000 mg/l.
By simply immersing the sensor in water, it easily measures the turbidity of rivers, lakes, dams, agricultural water, cooperative water, and drainage.
***Features*** - No sampling required The sensor is of the type that is directly immersed in the water being tested. Sampling of the test water is not necessary. - Compact sensor Both the diameter and weight have been slimmed down to half compared to conventional models. - Simultaneous measurement/display of turbidity and temperature The liquid temperature is displayed simultaneously on the LCD display. - Supports switching between NTU and mg/L units Measurements can be displayed in either unit by switching. - One-touch calibration Zero turbidity calibration can be done simply by immersing the sensor in pure water and pressing the calibration key. - Data memory function for 100 measurements Data measured in the field can be checked in the office or elsewhere. - Correction coefficient setting function If you want to correct turbidity measurement values to match conventional data, you can do so by setting the span coefficient. - Drip-proof structure (main unit) Can be used even on rainy days.
This is a turbidity meter using an integrating sphere scattering light method. The collected sample water is placed in a dedicated cell for measurement.
***Features*** In the analysis of wastewater quality, the measurement of SS (suspended solids) is considered important alongside BOD and COD. Traditional hand analysis for SS measurement is time-consuming, prone to individual errors, and complicated in operation. This device can measure SS quickly, easily, and with high precision, displaying results digitally. The measurement of suspended solids (SS) using an integrating sphere scattering photometry method is a direct method that does not require the filtration, heating, and weight measurement operations needed in the weight method (JIS method). It can measure both SS and turbidity with a single device. There is no need for complicated operations, and it allows for a wide range (2 range switching) of SS measurements. Since it uses an integrating sphere method, it is not affected by the color of the sample. The amount of sample required for measurement is small. It is easy to operate and compact. It is compatible with both AC and DC, and comes with a charger that includes an AC adapter. It also includes a portable case for convenient transport.
Measure the collected water sample in a dedicated cell!
Integrating sphere scattering light turbidity meter
Ideal for turbidity measurement of general environmental water such as rivers and lakes, as well as factory and construction wastewater.
The portable turbidity meter TB-31 has achieved simple turbidity measurement in the field with its immersion-type sensor. The reliability in low concentration areas has improved, and the repeatability in the low measurement range has significantly increased to ±0.5 NTU. Additionally, it features a power-saving design, is compatible with rechargeable batteries, and has a waterproof structure (IP67: can be immersed in 1m of water for 30 minutes). For more details, please contact us.